Airco Temescal Cv 8 Manual

YOU ARE BIDDING ON ONE TEMESCAL AIRCO CV-8 MODCV-8-110 POWER SUPPLY AND XYS-8-1A SWEEP CONTROL. THIS IS USED SHELF SURPLUS FROM A SHUT DOWN EVERGREEN. SOLAR FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G2C FRONT) International Buyers Please Note: Import duties.

Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

Airco Temescal Cv-8 Manual. 5010 Aluminum Valve H-82 3 Airco / Temescal Model: 8008 Wired Controller. Unused Aged Share 152 Temescal VES 2550.

We do not mark merchandise values below value or mark items as'gifts' US and International government regulations prohibit such behavior. Check out my!

Be sure to add me to your! Airco Temescal ED-701 Endpoint Detector Control& Cables End point detection for controlling plasma etching This old stock/surplus and untested. Item pictured is what you will be receiving.

Please Look At Detailed Photos. Buyer responsible for Tax's. Duties, and Tariff for your Country. If purchasing multiple items. We will send you an updated invoice with combined shopping when possible. Further Questions.

And I'll do my best to answer them. Thank you for your interest. And have a look at our other listings. If you have any questions. We can be reached M-F from 10am to 7pm PST. Quintronix Hayward.

CA 1-800-448-2123 Vacuum& Process Equipment New. Unused, Refurbished, Used. Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power Supply XYS-8 Sweep Description Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power. Supply with XYS-8 Sweep Control This item requires freight shipping. Please contact us for a quote prior to purchasing.

Manufacturer Airco Temescal Manufacturer Part Number CV-8-110 Item/Ship Weight 810 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. During normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. Extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included.

If you have any questions please contact us before bidding. Shipping This item may require palletized freight shipping.

Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300.

PID 44803 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. We can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qual.

Thanks for your interest in supporting Merit ePartners This auction is for a Airco Temescal CV-14 Electron Beam Controllers& Power Supply System. This system includes the control system: 3 Electron Gun Controls(one has 2 wires hanging out where the emission control knob should be) 2 High Voltage Controls. 1 Beam Position Sweep Control. And the power supply(Bottom) We have no means to power it on or test it. It is offered strictly as is. The part number on the label is CV-14-333.

To the right of the High Voltage Controls is a door panel with pictured components inside. The flaws we noted: one electron gun control has no knob and 2 wire hanging out where emission control knob should be and there is a key missing. There is a ding on the back door on the bottom unit. According to our research.

This system is used in sputtering and evaporation. Systems for precision vacuum deposition/ coating in semiconductor manufacturing. Please note that we do not know if the system is comp lete. There are no additional parts included. Only the parts that are pictured.

Please note that we are listing item/s on eBay with the condition'used' and not the condition'for parts or not working' because we do not know the full working condition of the products we are selling. We try to describe any known defects if we think there might be an issue. We are not experts. Items were consigned to us for resale.

The item/s is being offered as is. No returns to support the operation of our non profit organization.

Your purchases help to keep us a self sustaining enterprise. Please watch Meritonlinesales for more industrial. Test and measurement, scientific, computer, telecom and networking equipment. Shipping and Handling Information Please contact us for freight quotes.

We will need to know whether or not you have a loading dock or fork lift for receiving this pallet. We will also want to know if you are located in a commercial location. This item will ship from a business with limited access and a forklift. We charge to pr. Varian NRC 3117 E-beam Deposition Thermal Evaporator Temescal Multi-Pocket E-Gun Description Varian NRC 3117 Ebeam Deposition System Thermal Evaporator with Temescal E-Gun 18' Dia x 30' Tall Pyrex Bell Jar w/Implosion Cage 20' Dia Baseplate w/Hoist Leybold Heraeus Turbotronic NT 150/360(P/N 85472-1) Controller Leybold Heraeus Turbovac 150 Vacuum Pump Temescal Multi-Pocket E-Beam Gun Varian Cryostack-8 Briscoe MFG Co. Brisk Heat Heater Model VRN211-001 Varian Ionization Gauge 0563-K2466-305 RD Mathis ATD GRS E/O Device K333 Tune/Couple Control Edwards E2 High Vacuum Two Stage Pump Model E2M8 Tested turbo pump and found it to be in good working condition Manufacturer Varian Manufacturer Part Number NRC 3117 Item/Ship Weight 1075 LBS Tech Condition This item has not been fully tested and is being sold as is.

Tested turbo pump. And found it to be in good working condition This item was deinstalled from a high-end research facility and components appear to be in good condition. It has not been fully tested. The unit is without compressor and Ebeam power supply. If you have any questions please call(805) 648-3300.

It can be previewed at our facility in Ventura, CA during business hours 8am to 5pm M-F. Photos in this listing may not show the exact item we will ship(ie. Extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included.

If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer.

We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee.

If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 16250 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the ship. You are bidding on a Temescal SuperSource E-beam gun. Sold as is with a two week right of return. It weighs 55 lbs and the dimensions are 16x16x12. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet.

We will bill shipments to your shipping account or add into the invoice total. We accept returns if specified in the Return Policy otherwise they are sold as is with no return. We will refund or exchange an item after it is returned and the shipping paid by the buyer.

We ship using FedEx. UPS or other requested agents but not the USPS. 626-334-0500 1331 Mountain View Circle Azusa.

Double your traffic. Get Vendio Gallery- Now FREE! DESCRIPTION Temescal Edwards Gun Controller BEFORE BIDDING OR BUYING PLEASE READ THIS: Thank you for your interest in my item. My EBAY reputation is very important to me and I will work very hard to make all of my customers satisfied.

It is my goal to provide you good service and a good deal on the products I list. If for some reason. There is an issue with your product, please do not leave bad feedback without making a fair attempt to resolve any issues. You may be surprised how hard I work to fix the problem and make you a return customer. PAYMENT AND SHIPPING INFO Payment Options PAYPAL Shipping ALL ITEMS ARE SHIPPED WITHIN 48 HOURS OF PAID IN FULL TRANSACTION.ADDITIONAL TIME NEEDED ON SOME ITEMS DUE TO SHIPPING LOGISTICS(CUSTOM BOXING.FREIGHT,INSPECTION,ETC. Pickups ALL PICKUPS. MUST BE SCHEDULED BETWEEN MONDAY AND FRIDAY BETWEEN THE HOURS OF 10AM AND 4PM.

24 HOUR NOTICE.BY EMAIL OR PHONE,IS REQUIRED PRIOR TO ALL PICKUPS THIS WILL ALSO BE PRESENTED ON PCDEALS FACEBOOK PAGE INBOX ME FOR A LINK TO ADD FRIEND REQUEST. I prefer email communications.But feel free to contact me by telephone at(757) 696-7866. Leave a message with the item number and what the issue is, if the phone is not answered. I will probably return your message by email. Proper response time may take up to 48 hours. If for some reason. You do not get a response from me, there must be a problem.

I return all messages and emails no matter what the problem. Please have patience and try again. PCDEALS Powered by The free listing tool. List your items fast and easy and manage your active items.

Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power Supply XYS-8 Sweep Description Airco Temescal CV-8-110 Electron Beam Vacuum Deposition Power Supply with XYS-8 Sweep Control This item requires freight shipping. Please contact us for a quote prior to purchasing. Manufacturer Airco Temescal Manufacturer Part Number CV-8-110 Item/Ship Weight 810 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura.

During normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. Extended part numbers or revision numbers may not match) An accessory. Or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding.

Shipping This item may require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee.

If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 44803 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. We can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings.

ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qual. AIRCO TEMESCAL CV-14 E-Gun POWER SUPPLY- FULLY OPERATIONAL. Pulled from fully operational system. Fully tested.

Includes 28 Pin Tank Cable. Single Gun Operation. With X-Y Sweep. Shipping size and weight(without crate) is 900 lbs 32x40x60 from zip code 95060 We can have a crate built for $125 or you can arrange air ride based on the size above. Payment Terms: We accept Wire Transfer.

Credit Card or Company Check. California buyers must pay sales tax or provide resale certificate Payment must clear before arranging shipping/freight. Shipping: Buyer must arrange and pay for shipping and crating if required. No charge for local pickup Will deliver within the SF Bay area for modest charge International Bid(s) International bidder's and/or bidders outside the continental US must email seller before bidding Returns: We provide a 14 day right. Buyer pays return shipping Warranty: 30 day Warranty. CA sales tax may apply f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-140361eb5a4-0x103.

TEMESCAL- BJD-1800 PC/PLC Controlled High Vacuum E Beam Evaporator with Ion Tech Ion Milling Source Inventory# 57373.Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time.

Used thin film deposition system. PC/PLC controller with graphical color display provides fully integrated process and vacuum control. Recipe driven pump and vent processing and automatic pump, vent and regeneration cycles. Low profile bell jar design for easy substrate loading. Currently configured with custom double sided substrate holder.

Holds four substrates face down when motor turns clockwise and flips substrates when direction changes. Quartz substrate heaters.

Crystal deposition controller. Four pocket e-gun with Simba power supply. Cryopump with compressor. And roughing pump. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing.

Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size.

We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements.

BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com. Feel free to contact us for additional information through ebay mail. Or directly at: nrscientific@gmail.com/ 201) 592-1864. Temescal BJD 1800 Thermal Evaporator Dual Source Co-Deposition Refurbished- Mint Condition CTI Cryo Pump 3 Planet Depostion Fixturing Dual Cooke Thermal Evaporation P/S Sigma Dual Deposition Controller Please contact us for additional information.

Photos, warranty terms and conditions, etc. The system can also be customized for your application. For your reference. The seller is N&R Scientific Co. We have been providing the highest quality refurbished and fully guaranteed equipment worldwide for over 35 years. You can purchase with complete confidence that the equipment will be provided in excellent cosmetic and perfect operational condition. Our 50,000 square foot facility is located in the metropolitan.

TEMESCAL- BJD-1800 Electron Beam Evaporator Inventory# 55181.Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time.

Used thin film deposition system. Maxtek crystal deposition rate monitor. Four pocket E-Gun.

CV-14 E Beam power supply with sweep controls. Vacuum gauges. CTI cryopump with compressor and roughing pump. Does not have substrate heaters.

Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty.

Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at.

Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services.

Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com.

AIRCO TEMESCAL BJD-2400 E-beam evaporation system Hivac Process Chamber: 18” X 9” Chamber Door is hinged. 90º open model, easy touch self-aligning door closure and sealing. This equipment is offered as is configured below and cleaned it will be a fully operational system, with the following features. Frame- 56” W X 34” footprint with 21” Electronic Bay. Stainless Steel water cooled bell jar with deposition shielding. With film shutter aperture.

Leybold TMP/1000 Turbo Pump with NT1000/1500 Controller. HSD Vacuum Controller. Granville Phillips 307 Ion/TC Gauge package. Inficon IC6K deposition controller.

Single 6Mhz crystal head. Single flag type source shutter. Airco Temescal CV8- 8KW power supply with sweep. Telamark Four(4) 25CC pocket E gun. Telamark Model 376 Crucible Indexer. Single Lift off Dome 2” Round substrate tooling.

Leybold D30 Mechanical Pump. Affinity CWA-300 air to water chiller. Manuals and schematics binder covering equipment. As available).

YOU ARE BIDDING ON ONE TEMESCAL AIRCO CV-8 MODCV-8-110 POWER SUPPLY AND XYS-8-1A SWEEP CONTROL. THIS IS USED SHELF SURPLUS FROM A SHUT DOWN EVERGREEN SOLAR FACILITY AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156.

OR HIT ASK THE SELLER A QUESTION. G2C FRONT) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.

Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as'gifts' US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your! Temescal BJD-2000 E-Beam Evaporation System with Ion Source for Ion Assisted Deposition Processes Inventory# 58040.Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased.

Please contact us for lead-time. Used thin film deposition system with a date of mfg. Selling fully refurbished with 90 day warranty. Longer warranty and installation available at additional cost. Control System: The TCS provides for full automatic. Manual and service modes of operation. The operator interface is via a personal computer running InTouch software by Wonderware.

The control system consists of one Allen Bradley SLC 500 5/04 PLC processor, controlling all the pumps, valves, drives, deposition source(s) power supply(s)gas system, gauges and ion source. Multiple layer deposition control. Utilizes the Inficon XTC/2 crystal rate controller. TCS also includes full Data Logging Capabilities.

High electronics cabinet with standard 19 in. Rack on casters. Edwards High Vacuum Active Inverted Magnetron(AIM) gauges and Pirani controllers for high and low vacuum applications, all monitored and controlled via the Temescal Control System(TCS) Basic Design: Batch loading vacuum chamber. Hinged bell jar. Electric hoist actuation of source flange for easy gun and shield removal and cleaning. Swing-out source tray for easy access to the electron beam source and feedthroughs. Water cooled source chamber and bell jar.

Substrate Holder: Normal angle-of-incidence fixturing for lift-off processes in a 20 in. Includes motor, feedthrough and motor speed controller. Dome is 17.25 in. 438.15mm) in diameter and has a spherical radius of 19.5 in. Source Extension Collar: Extension Collar which mounts on Source Tray to increase the Source to Substrate Distance by 8 in. 203.2mm) From 19.5 in.

495.3mm) to 27.5 in. 698.5mm) Power Supply: 6 kW constant voltage power supply for operation. One gun control.

800x600 Airco Temescal CV-8 E-gun Power Supply& Controller Rebuilt with 30 Day Warranty CV-8 Electron Beam Power supply Air Cooled. 208-230V, 3PH 70A 1 gun. 1 tank configuration Includes interconnect cables Includes operation manual Rebuilt and Tested. Ready to Ship 550# 32x32x43H( plus skid/crate) Optional sweep available Optional gun transformer available Check Out: Purchase: Making purchases is easy and simple. To place an order for procurement.

Please click the“Buy It Now” button. Follow to the next page for payment instructions.

Payment: Click the“Pay Now” button at the top of the E-Bay page to proceed with the checkout and payment process. Payment must be made within 5 days of purchase. Accepted Forms: We accept PayPal.

Or you may pay on your credit card via PayPal. When paying via.

Payments must include your shipping address and should be submitted via the E-bay payment process. Sales Tax: For California customers. Sales tax is added and depends upon your location. If you are tax exempt. Please provide a copy of your Tax Exempt Certificate prior to check out. Please do not send payment before receiving a revised invoice.

Shipping: Shipping rates are the responsibility of the customer and are not refundable. Rates include handling. Packaging materials, label scanning and tracking information. Shipping rates are based upon the weight and dimensions of the package and your location. If we have packaging materials for smaller items. We include packaging and handling at no charge. If they are unavailable, we charge our cost.

For larger capital equipment, please contact us for crating costs and exact weight prior to shipment as the crate will add weight to the tool set. Insurance: Should you prefer insurance on your item. Please inform us PRIOR to check out so this may be added to the shipping cost. Insurance is not added unless specifically requested by the buyer. Processing Time: Once payment has cleared.

The true count is what determines our advantage and ultimately the amount we should bet. Blackjack capitalized. The true count is fully explained in our section.

We make every effort to ship your item within 1. 1305 Space Park Way Mountain View. CA 94043(650)969-8811 Used Temescal Single Pocket Emitter Used emitter assembly for single pocket Temescal super source. Good condition. No obvious defects. Warranty Unless stated otherwise in the description.

The item is being sold'as is' and'as pictured' with no additional cables, power supplies, controllers or accessories beyond what is pictured. If you need further information or clarification about this item, please with any questions prior to purchase. No returns accepted. Shipping Standard shipping methods are UPS Ground or Motor Freight. We will usually ship within 2 days of receiving cleared payment. If the freight cost is not shown above.

Contact us for details. Payment We accept Visa. MasterCard, American Express and PayPal. Assembled using the FreeForm Builder at robshelp.com. You are bidding on a Airco Temescal E-beam gun.

Sold as is with a two week right of return. PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet. We will bill shipments to your shipping account or add into the invoice total. We accept returns if specified in the Return Policy otherwise they are sold as is with no return. We will refund or exchange an item after it is returned and the shipping paid by the buyer.

We ship using FedEx. UPS or other requested agents but not the USPS. 626-334-0500 1331 Mountain View Circle Azusa. Temescal FCE-2500 Fast Cycle E-Beam Evaporation System for Lift Off Process Inventory# 58539.Sold AS IS. System is missing hard drive and E-Gun power supply. Five pocket E-Gun. Gun controls but no power supply.

Single dome substrate holder with rotation. Crystal deposition rate monitor. Vacuum Product Chamber: 28 in.

Vacuum chamber for E-Gun has a gate valve for isolation from the product chamber. Two CTI OnBoard cryopumps with a single compressor. AS IS items will have different return and warranty conditions. Please contact us directly for as-is pricing.

Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500.

Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are.

Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years.

Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. TEMESCAL- FC-1800 E-Beam Thin Film Evaporator with Substrate Heaters and Deposition Rate Controller Inventory# 57605.Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. System has a load lock for fast cycling of wafers.

Water cooled stainless steel bell jar. Currently configured with lift-off dome for 4 in. Quartz substrate heaters. Automatic or manual valve controls. Crystal film thickness monitor. CV-8 8 kW e-beam power supply with sweep controller. 4 pocket e-gun with pocket selector.

Cryopump and roughing pump. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500.

Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services.

Demonstration capabilities, and broad selection of inventory add up to value for our customers. TEMESCAL- FC-1800 Load-Locked Multisource Resistive Thermal Evaporator Inventory# 55616.Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time.

Used thin film deposition system. Load locked source chamber.

Two evaporation sources. Inficon IC6000 deposition monitor. Does not have substrate heaters.

Single lift-off style substrate dome. CTI Cryopump with compressor and roughing pump.

Water cooled bell jar with 19-1/2 in. Can be sold in untested as-is condition.

Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system.

Including lead-time, or for any questions via. EBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made.

Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.

TEMESCAL- FC-1800 Load-Locked Electron Beam Evaporator with Substrate Heaters Inventory# 53808.Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. This fast cycle load-locked evaporator brings the bell jar down to operator level without sacrificing the throw distance. Cryo pumped high vacuum system with roughing pump.

4 pocket gun with Temescal CV-8 power supply. Inficon IC4 Deposition monitor. Bell Jar: 19-1/2 in. Single substrate dome 17 in. With rotation control.

Includes substrate heaters. Auto valve sequencer. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact. Us directly for as-is pricing. Please contact us for additional information on this system.

Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services.

Demonstration capabilities, and broad selection of inventory add up to value for our customers. TEMESCAL- BJD-1800 E-Beam Vacuum Deposition System Inventory# 57141.Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Bell jar style E-Beam evaporator.

6 pocket e-gun with source selector. Temescal Simba E-Beam power supply with power and sweep controls. Inficon IC6000 crystal deposition rate monitor(can be upgraded to newer model at additional cost) Quartz lamp substrate heaters Single lift off dome with rotation control. CTI-8 cryopump with compressor and roughing pump.

Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size.

We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements.

BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.

TEMESCAL- BJD-1800 4 Pocket E-Beam Evaporator Upgraded by TES Inventory# 55702.Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Inficon XTC/2 crystal deposition monitor/controller.

Three dome planetary configuration for 3 in. Rotation control.

All system components mounted in cabinet except cryo compressor. CTI cryopump compressor with roughing pump. Auto valve controller. 4 pocket e-gun with turret source selector. Niles Electronics NE-6 E-Beam power supply.

X-Y sweep controller. Water cooled 17.5 in.

Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Contact us directly for as-is pricing. Please contact us for additional information on this system.

Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size.

We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. TEMESCAL- VES-2550 E-Beam Evaporation System with Two Four Pocket E-Guns Inventory# 57476.Before purchasing this system.

Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Used thin film deposition system. Inficon IC4 crystal deposition monitor. Two four pocket electron guns with rotation controller. Temescal CV-8 E-Beam power supply. Currently configured with single fixed dome for 3 in.

Substrates(see photo) Water cooled 25 in. Automatic or manual valve control. CTI cryopump with compressor and roughing pump.

Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional. Information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size.

We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years.

Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. This BOC edwards/ temescal box chamber is in great condition and ready to accept deposition hardware of your choice and begin working. The machine has a box with an inside footprint of 32x32 inches. 22 inches tall. The source well is 23 inches in diameter and 24 inches deep.

The main chamber is 15 inches deep giving a total throw distance of up to 61 inches. Two doors of 32 by 22 inches provide total access to the sample chamber. One door is quick access, the other is bolted. A 18 inch square door is also provided on the source well. A planetary rotation mechanism is currently installed. All vacuum functions of the chamber are controlled via local touch screen interface in manual mode. In remote mode all features of the chamber including deposition can be controlled via the included PLC.

This functionality can even be broadcast over the internet. For true remote control. The system is equipped with an aircooled CTI 1020R compressor. Backing is via an ebarra dry mechanical pump to ensure a zero oil backstreaming system that is ideal for coatings where hydrocarbon contamination is unacceptable such as deep uv thin film optics.

This item will ship in a wooden pallet with an estimated weight of 7000 lbs. I am happy to ship world wide. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This auction is for one large lot of Temescal CV14& CV8 E-gun Power Supply Parts. These items are generally in decent shape as they have been held in stock for parts for the e-gun power supplies of machines being rebuilt. We have decided to narrow our focus and streamline our operation and these parts are no longer needed. As you can see by the photos there is a wide variety. Including: gun, shutter, sweep and position control modules and the power supply boards and components to support them.

There are hard to find components for board level repair as well as capacitors. Transformers, and many other rare parts to keep the workhorse CV14& CV8 power supplies running. Also Includes 12ea high voltage transformers 48-1004-210-205-5443 including several new ones. All are believed functional(these sell used for several hundred a piece) As well as 2ea Temescal 3ph transformers. See last photo) I've also included 2ea Versavac controllers and a couple of Simba E-gun controllers. There are many items in this lot that are worth more than the starting price and a lot of money could be made by someone willing to list the items individually. But we don't have the time.

This is a great deal for someone. Items will be carefully packaged in a Gaylord box on a pallet of 40x48x40 with an estimated weight of 2300 lbs(mostly for the transformers) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-147b642447e-0x107. Temescal Edwards Inficon IC 6000 Thin Film Process Controller Model# 013-338 This unit powers up. Screen and fan work as they should. Buttons light up. Luxonix purity vst crack.

The unit displays'Begin RS232 Test' and then stays on that screen. No further testing done on our end- not sure if it needs to be hooked up to something to continue with the RS232 test or if it needs some kind of calibration. But for this price you can afford some calibrations.

But I will try to answer your questions the best I can. Will ship international. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-147d05af4bc-0x107. You are bidding on a Airco Temescal single pocket crucible for electron/ion beam. Sold as is per pictures. With a two week right of return. It weighs approximately 60 lbs and will be shipped in a 16x16x16 box.

PTB packs parcel shipments utilizing foam in place packaging with care. We ship heavy items(we draw the line at 100 lbs in most cases) boxed and strapped to a pallet.

We will bill shipments to your shipping account or add into the invoice total. Our preferred carrier is FedEx.

626-334-0500 1331 Mountain View Circle Azusa. TEMESCAL BJD-1800 THERMAL EVAPORATOR DEPOSITION CHAMBER SYSTEM MODEL: BJD-1800. VOLTAGE: 208V. CURRENT: 70A. THREE PHASE FREQUENCY: 60Hz. MAXTEX MDC-360 DEPOSITION CONTROLLER CRYO-TORR HIGH VACUUM PUMP VERSA VAC 2 APPROXIMATE INTERIOR CHAMBER DIMENSION: Unit is in good working condition.SHIPPING INFORMATION.

We recommend Freightquote or the Freight company of your choice. Buyer is responsible for cost and arrangement of freight shipping. We do not charge for loading. Unit can only be shipped via freight. For freight inquiry we recommend Tony Sidoti at FreightQuote You can reach him at 1800-323-5441 Ext 6532. You can either supply him the ebay listing ID.

Or you can use the shipping information below to better help you. We charge a $100 palletizing fee for this unit. Unit will be shrink wrapped in cardboard and steel banded to pallet.

Dimension: Approximate Dimension: 8'W x 5'L x 80'H Approximate Weight: 1300 lbs. Comes as shown in photos(R-C) Item Condition: Used. In good physical condition.

All switches actuate properly. We guarantee that this unit will not be DOA.

And offer a 14 day return policy. Why buy from us?

It is our goal to turn every bidder into a repeat buyer. Unless stated otherwise in the description. All merchandise is GUARANTEED to be as described and to be in working order upon arrival. PLEASE NOTE: Unit MUST be removed from our facility within one week of end of auction. Please be sure to check out out other listings on Ebay. Item will immediately be re-listed if payment is not received within 5 working days.

Please contact seller if for any reason payment cannot be made on time. Check out the photos provided. Thank you for looking and Good Luck!

Sales Tax: Sales Tax will apply to items sold to buyers who take delivery in California. We will send this unit via freight. We do not charge handling fees; high bidder pays actual shipping charges. Item may be picked up from our location.

PAYMENT: Payment is due within 5 working days from end of auction. SHIPPING: Pleas.

HERES A USED AIRCO TEMESCAL CV8-110 ELECTRON BEAM POWER SUPPLY USED IN THE SEMICONDUCTOR BUSINESS.WE ARE NOT THE USERS OF THIS,WE ARE USED EQUIPMENT DEALERS THAT PURCHASED THIS WITH A LOT OF OTHER SURPLUS SO WE ARE FORCED TO OFFER THIS AS IS AND UNTESTED AS WE LACK THE KNOW HOW TO FULLY TEST THIS,IT APPEARS TO BE IN NICE CONDITION,THIS IS A 208 VOLTAGE INPUT AND EMISSION VOLTS DC OF 10 KV,AND 8 KW OF DC,THIS WILL BE SECURED AND WRAPPED TO 36 X 36 INCH SKID WITH A WEIGHT OF 525 LBS READY FOR SHIPPING. NO FREE SHIPPING AND FREIGHT QUOTES CAN BE OBTAINED BY CALLING THE PERSON LISTED BELOW AS WE CANNOT GIVE THEM. STOP IN AT THE GLOBAL SURPLUS STORE BETWEEN THE HOURS OF 8:00 AM TO 3:00 PM MONDAY THRU FRIDAY AND LOOK AT MANY SURPLUS ITEMS.FEW NEW BUT MANY AT COST SAVING USED PRICES,FOR FREIGHT QUOTES,YOU CAN USE WHOEVER YOU LIKE,WE USE SCOTT CYRUS.

AT UTI AND HE CAN BE REACHED AT 714-710-9078,HE GIVES GOOD FREIGHT RATES TO ANYWHERE YOU WANT TO SHIP,WE DO NOT RECIEVE ANY BETTER QUOTES THAN YOU CAN THEREFORE,WE ASK YOU TO CALL DIRECT,THANK YOU. Temescal Model 924A 3/4' Ionization Gauge Tube for VersaVac 2 or 5 15SH-0126-5461 5461 This is definetaly compatible a 1985 VersaVac 2 or 5. Here is a link to the page with the parts list. Www.hsdengineering.com/images/ Temescal%20VVAC.pdf Made to A-VAC’s standards This was pulled from a working environment. It should work very well as it is in like new condition. Thanks for looking WARNING: I nternational Shi p ments TAKE MORE TIME! WE SHIP WORLDWIDE.

Unless you paid $35 or more postage. There is NO ONLINE TRACKING. And it will take 2-3 weeks longer than Priority: All Foreign Buyers: USA Dept. Of HOMELAND SECURITY now processes all packages leaving the USA since 9/11. This adds 1-2 WEEKS processing time. Import duties.

VAT, taxes, or tariff charges are not included in the item price or shipping costs. Customs duties or VAT. Is the buyer's responsibility. You may need to go to YOUR LOCAL POST OFFICE to pay and pick up your items.

ALLOW 4-6 WEEKS for delivery. HAVE MERCY on our Feedback PLEASE 5 Star Ratin g s are terribly misleading! A'4' is NOT Good. Acceptable, or ok A'3' is NOT Neutral whatsoever A'2' or a'1' is a catastrophic event that hurts sellers. Raises prices. Too many will ban an account!

WE MUST have 100% 5's' to remain in good standing as a seller on this site. Please contact us if you will not leave a'5' for us(or leave blank) DON'T Use'4' for SHIPPING TIME Sellers are allowed 1-3 days to SHIP, 3-11 business days to DELIVER. Free shipping = Parcel Post TIME!

Shipping time IS NOT Time to Deliver! PLEASE LEAVE O NLY! Return Policies- EMAIL. EMAIL, EMAIL Defective or Damaged item rarely happens. BUT if it did.

Always have a backup plan if item is IMPORTANT 2. We can't fix immeditately. So please be patient 3. Don't be angry with us. We're not the CAUSE. EMAIL THE SELLER- DO NOT FILE A CLAIM 5. No advance replacement.

Item must be sent back 6. PICTURES REQUIRED for all damage claims: 7.

Temescal 5010 6' ASA Vacuum Gate Valve. Aluminum Manual Hello. You are viewing a listing of a product provided by Woodman Mechanical Surplus. We pride ourselves on providing hard to find parts at the lowest price. I ship using the USPS and Fedex for larger items.

If you do not have a mailbox. Need it sent by a different shipper, or to a different address than automatically provided to me by paypal or ebay send a separate message or a question to me prior to or directly after the purchase.

It is important to me that you receive your product(the first time).

An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components.

See the seller's listing for full details.Seller Notes:“ This unit has not been tested. It is missing the main tube. It will require special shipping. Please view our photo set and contact us with any questions, to obtain a shipping quote, to arrange local pickup, or to schedule a viewing at our facility. ”Brand:Airco TemescalMPN:CV-8.